Animal Surgical Equipment Accessories
Med Vet International Cuffed Endotracheal Tube, 13mm, Each
High-quality, cost-effective endotracheal tubes are manufactured in accordance with the strictest standards, and each one is thoroughly tested for reliability and safety. Available in many styles to suit a wide range of applications
Instech Three way Y connector, 25ga, sterile.
The Instech SCY25 is a sterile three‑way Y connector designed for combining flow paths in small‑animal infusion and glucose clamp studies. Built with 25ga stainless steel tubes and a chemically resistant Kel‑F hub, it provides an ultra‑low‑dead‑volume junction with approximately 6mm tube extensions for secure attachment to fine‑diameter laboratory tubing.
Features
- Sterile 3‑way Y connector for multi‑path fluid routing
- 25ga stainless steel tubes for minimal dead volume
- Kel‑F (PCTFE) hub for chemical resistance
- Dead volume less than 3µL
- ~6mm tube extensions for reliable tubing engagement
Instech Stainless steel catheter / tubing coupler, 23ga x 8mm. Nonsterile. Package of 100.
The Instech SC23/8 is a stainless steel catheter coupler used to connect implanted catheters to external infusion tubing. Sized at 23ga and 8mm in length, it provides a compact, secure, low‑dead‑volume junction suitable for small‑animal infusion and sampling workflows. The rounded edges protect tubing from damage, and the couplers are supplied non‑sterile in packs of 100 for laboratory use.
Features
- 23ga stainless steel straight catheter coupler
- 8mm length for compact catheter‑to‑tubing connections
- Rounded edges to minimize tubing wear
- Non‑sterile; packaged in sets of 100
- Connects implanted catheters to external infusion lines
Rod mounting clamp for Instech P720 peristaltic pumps.
The Instech P720/RMC is a rod mounting clamp designed to secure any of the P720 series peristaltic pumps to standard laboratory ring stands or lattice frames. This allows the pump to be positioned at the ideal height and orientation for laboratory setups such as tissue perfusion or continuous infusion.
Features
- Type: Laboratory rod mounting clamp
- Compatibility: Fits all P720 series pumps, including the P720, P720/10K, and P720/66
- Function: Securely attaches the pump to standard 0.5in (12.7mm) laboratory rods
- Application: Frees up bench space and allows for precise positioning near the subject or organ chamber
- Installation: Attaches to the rear of the pump housing using existing mounting points
Instech Stainless steel catheter / tubing coupler, 22ga x 8mm. Nonsterile. Package of 100.
The Instech SC22/8 is a stainless steel catheter coupler used to join implanted catheters to external infusion tubing. Sized at 22ga and 8mm in length, it provides a compact, low‑dead‑volume connection suitable for small‑animal infusion setups. The rounded edges help prevent tubing damage, and it is supplied non‑sterile in packages of 100 for laboratory use.
Features
- 22ga stainless steel straight catheter coupler
- 8mm length for compact catheter‑to‑tubing connections
- Rounded edges to minimize tubing wear
- Non‑sterile; packaged in sets of 100
- Used to connect implanted catheters to external infusion lines
Instech Stainless steel catheter / tubing plug, 25ga x 12mm. Nonsterile. Package of 100.
The Instech SP25/12 is a stainless steel catheter plug used to seal externalized catheters prior to infusion or sampling procedures. Sized at 25ga and 12mm in length, it provides a secure, low‑dead‑volume closure that helps maintain catheter patency and prevent fluid leakage. Rounded edges protect delicate tubing, and the plugs are supplied non‑sterile in packs of 100 for use in laboratory infusion systems.
Features
- 25ga stainless steel catheter plug
- 12mm length for secure catheter sealing
- Rounded edges reduce risk of tubing damage
- Non‑sterile; supplied in packs of 100
- Used to close externalized catheters before infusion
Instech Harvard Apparatus Pump 11 Elite inf/wd programmable single syringe pump (704504), US cord
The HA1100W is a programmable single-syringe infuse/withdraw pump from the Harvard Apparatus 11 Elite series. It features a high-resolution touch screen for creating complex methods without a PC. The advanced mechanism ensures accurate, pulse-free flow for applications ranging from microdialysis to large volume infusions.
Features
- Type: Single-syringe infuse/withdraw programmable pump
- Syringe Size: 0.5µl to 60ml
- Flow Rates: 1.28 pl/min to 88.28 ml/min
- Interface: 4.3 inch color touchscreen
- Memory: Stores 2 user-defined methods (50 steps each)
- Accuracy: ±0.5% with ±0.05% reproducibility
- Connectivity: USB, RS-485, and 15-pin digital I/O
- Linear Force: 35 lbs (16 kg)
- Occlusion Alarm: None
Instech Polyurethane tubing, .017x.037in. Thick walled to minimize kinking or puncture. Makes a good connection with 25ga couplers and swivels. 30m (98ft) spool, nonsterile. For external use only; not for implantation.
The Instech VAHBPU‑T25 is a polyurethane external infusion tubing designed for dependable connections with 25ga swivels and couplers. Its thick‑walled .017x.037in construction resists kinking and puncture while providing a secure friction fit for tether and infusion setups. Supplied nonsterile on a 30m (98ft) spool, it is intended for external infusion use only and not for implantation.
Features
- Polyurethane tubing with .017x.037in dimensions
- Thick‑walled to minimize kinking and puncture
- Reliable fit with 25ga couplers and swivels
- 30m (98ft) nonsterile spool
- For external infusion use only; not implantable
- Used in VAH and VAB tether assemblies
Instech Mulit-syringe rack with withdrawal bracket, 6-10 for Harvard Apparatus PHD Ultra, upgrade after purchase (703024)
The Harvard Apparatus HA3024 is a syringe rack accessory for the PHD Ultra series pumps. It is designed to hold up to four 140 ml syringes, significantly increasing the volume capacity for long-term or high-volume infusions and withdrawals compared to the standard dual-syringe rack.
Features
- Compatibility: Specifically for use with Harvard Apparatus PHD Ultra series pumps
- Syringe Capacity: Holds up to four syringes simultaneously
- Syringe Size: Designed for large volume 30 ml to 140 ml syringes
- Material: Durable stainless steel and plated steel construction
- Application: Ideal for high-volume delivery and continuous flow setups
- Benefit: Increases the total fluid volume available before requiring a refill
- Installation: User-installable rack upgrade for existing Ultra pump units
- Dimensions: Expanded width to accommodate four large-diameter syringes
Instech Covance Infusion Harness™ for rats, harness only, non-sterile. Mates with PS95 spring tether. For infusion or sampling with rats.
The Instech CIH95AB is a Covance Infusion Harness for rats designed to securely hold an implanted catheter during infusion or sampling studies. It provides stable exteriorization without a spring and is built to mate with PS95 spring tethers, offering a reliable connection point for swivels and tubing in long‑term experimental setups.
Features
- Harness-only design for rat infusion and sampling
- Compatible with PS95 spring tethers for secure attachment
- Provides stable exteriorization of catheters
- Non-sterile, durable construction for repeated use
- Suitable for long-term infusion or IV self-administration studies
Instech Covance Infusion Harness™ for rats with .090in ID 12in (30cm) spring tether, non-sterile. For infusion or sampling with rats.
The Instech CIH95 is a Covance Infusion Harness for rats designed to protect an externalized catheter during single‑channel infusion or sampling. It features a molded elastomer saddle with a vented dome, a 12in stainless‑steel spring tether to transmit torque to the swivel, and adjustable belly bands that secure the harness while allowing for animal growth.
Features
- 12in spring tether (.090in ID) for catheter protection
- Molded elastomer saddle with vented dome
- Adjustable belly bands for proper fit and comfort
- Supports single‑channel infusion or sampling
- Designed to connect directly to a swivel via the spring tether
Swivel mount on lid for Techniplast / Nalgene metabolism cage. Holds Instech swivels for rat infusion or blood sampling.
The Instech METAMOUNT is a specialized swivel mount designed for Tecniplast (Nalgene) metabolic cages. It firmly fixes a fluid swivel above the cage to facilitate continuous infusion or blood sampling while the animal is in a metabolic environment. Unlike the "SL" version, this model features a standard, solid cage lid.
Features
- Type: Swivel mount for metabolic cages
- Construction: Vertical and horizontal mounting bars with hardware
- Components: Includes a new cage lid with pre-drilled mounting holes
- Compatibility: Fits standard 8in (20cm) diameter Tecniplast or Nalgene metabolic cages
- Application: Holds Instech plastic or stainless steel swivels for rat or mouse research
- Optional Upgrade: Available with a slotted lid (METAMOUNT/SL) for easier animal removal